1. Digital Library
  2. Heritage Group of Institutions, Kolkata
  3. Heritage Institute of Technology,Kolkata
  4. Services of HITK
  5. Alerting of New Journals
  6. Alerting of New Journals (ME)
Please use this identifier to cite or link to this item: http://localhost:80/xmlui/handle/123456789/9684
Full metadata record
DC FieldValueLanguage
dc.date.accessioned2025-05-29T10:09:44Z-
dc.date.available2025-05-29T10:09:44Z-
dc.date.issued2024-05-
dc.identifier.issn2250-2122-
dc.identifier.urihttp://localhost:80/xmlui/handle/123456789/9684-
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofseriesVolume-105;Issue-2-
dc.subjectJOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES Den_US
dc.subjectA Comparative Study on Abrasive Wear Behavior of TiBJGraphite Reinforced Cast and Hot Rolled A17075-Based HybridMMCsen_US
dc.subjectA Comparative Study on Effect of Welding Process on Microstructures and Mechanical Properties of Super Duplex Stainless Steelsen_US
dc.subjectAerodynamic Drag Reduction of 3D Printed Bus Model and Substantiation Using Wind Tunnelen_US
dc.subjectAn Integrated Approach for Contact Stress Analysis of Aluminium Composite Gears through Finite Element Analysis and Experimental Test Rig Testing Under Misalignmenten_US
dc.subjectAn Investigation into the Effect of Rock Properties on Drill Bit Lifeen_US
dc.subjectAn Investigation into the Mechanical Properties of an Epoxy-Based Composite Made From Jute Fiber and Reinforced With Sal Tree Gum Powdeen_US
dc.subjectAnalysing Microstructure and Hardness of SS-304 Under Annealed, Normalized, Quenched and Step Cooled Conditionsen_US
dc.subjectAnalysis of Critical Wear Phenomena and Stress Induced in WC-Co-Based Twist Drill Bits Used for Drilling Hard Rocken_US
dc.subjectAnalysis of Factors Influencing Steel Demand: A Structural Equation Modelling Approachen_US
dc.subjectAnalysis of Gaseous Fuel Adsorption by Synthesizing Zinc-BDC MOF and Cerium-BDC MOFen_US
dc.subjectAnalysis of Glass and Carbon Fiber-Reinforced Aluminum-Sandwiched Composites in Automotive Applicationsen_US
dc.subjectAnalysis of Microstructural, Mechanical and Surface Properties of Aluminium Hybrid Composites Obtained Through Stir Castingen_US
dc.subjectApplication of a Novel Decision-Making Algorithm in Development of a Nylon Hybrid Composite for Manufacture of Plastic Gearsen_US
dc.subjectApplication of Ranking Methods for Evaluation of Critical Factors Involved in Roof Fall Fatal Accidents in Indian Underground Coal Minesen_US
dc.subjectAssessment of Environmental Severity Around the Mining E Region Using GIS-Based AHP Model: A Case Study of the Dongri Buzurg Manganese Ore Mine, Indiaen_US
dc.subjectBandgap Prediction of Hybrid Organic-Inorganic Perovskite Solar Cell Using Machine Learningen_US
dc.subjectCharacterization and Health Risk Assessment of Airborne Dust Generated in a Highly Mechanized Underground Metalliferous Mineen_US
dc.subjectCharacterization of Aluminium Hybrid Composites by Analysing the Effects of Mustard Husk Ash and Silicon Nitride Compactionen_US
dc.subjectComparative Study on Metallography and Mechanical Properties of AI-Cu-NilFeNb Composites Fabricated by Electromagnetic Stir Casting Processes via Sand and Metal Mold Systemen_US
dc.subjectComparative Study on the Characteristics of Fluidized Bed Combustion and Pulverized Coal Combustion Bottom Ash Bricksen_US
dc.subjectCritical Analysis into Mechanical Properties and Microstructure of Dissimilar Welded Joint Between Stainless Steel-304 and Inconel-718en_US
dc.subjectDesign, Development, and Performance Evaluation of a Lightweight Short Shifter for Enhanced Gear-Shifting Quality in Automobileen_US
dc.subjectDevelopment of an Algorithm for the Prediction of Slope Failure in Surface Minesen_US
dc.subjectDevelopment of Flow Sheets to Recover Critical Minerals from Brahmagiri Lean-Grade Beach Sand Depositen_US
dc.subjectDevelopment of Magnesium Alloys and Composite Through Flux and Fluxless Liquid Metallurgy Proceduresen_US
dc.subjectEffect of Bamboo Leaf and Pista Shell Powder Particles on Mechanical and Wear Behaviour of Polymer Compositesen_US
dc.subjectEffect of Clay, Mixing Speed, and Time on Mechanical Properties of Glass Fiber/Clay Reinforced Unsaturated Polyester Prepared by Vacuum Bag Techniqueen_US
dc.subjectEffect of Heat Treatments on Tensile Fracture Behaviour of Ti-6AI-4V Alloy Friction Weldsen_US
dc.subjectEffect of LuffalBasalt Fiber Hybridization on the Mechanical and Surface Morphology of Epoxy Compositesen_US
dc.subjectEvolution of Tribological Performance of Polypropylene with Carbon Fibre Composites Fabricated Through FDM Technology by Varying Infill Densityen_US
dc.subjectExperimental Analysis on the Impact Behaviour of Graphite-Filled Glass Fibre Reinforced Epoxy Composites Subjected to Sea Water Ageing and Notch Depthen_US
dc.subjectExperimental Comparison of the Effect of Fiber Orientation on Mechanical Properties of Natural Fiber Reinforced Composites (NFRCsen_US
dc.subjectExperimental Investigation of Erosion Behaviour of Epoxy Reinforced with Different Shape of Nano sized Alumina Oxideen_US
dc.subjectExploring the Mechanical and Thermal Properties of Novel AbacalAramid Hybrid Composite with CaC03 Filleren_US
dc.subjectFatigue Analysis of Hybrid Aluminium 7075 Composite Gearsen_US
dc.subjectHydrothermal Synthesis, Characterization of W03 Nanoparticles for Ethanol Gas Sensor Applicationen_US
dc.subjectInfluence of Laser Power on Microstructure and Wear Behavior of Additively Manufactured AISilOMg Alloyen_US
dc.subjectInvestigation of Thermomechanical Properties of A1z0r TiBv'Silicon Carbide Ceramic Nanocomposites for Thermal Barrier Coatingsen_US
dc.subjectInvestigation on Mechanical Characteristics of Fluxed Composite Pre-reduced Pellets Made with High Ash Coalen_US
dc.subjectInvestigations into Impact Behavior of 3D Printed Nylon Short Carbon Fiber Compositeen_US
dc.subjectInvestigations into Impact Behavior of 3D Printed Nylon Short Carbon Fiber Compositeen_US
dc.subjectMechanical and Thermal Characterization of Jute Fibre Reinforced Epoxy Composites and Lime Sludge as a Filleren_US
dc.subjectMechanical Properties of Sugarcane Bagasse PowderlFlyash Reinforced Polymer Compositesen_US
dc.subjectMicrostructure and Mechanical Properties of Friction Stir Welded Al-Mg-Si Alloys Under Variable Parameter Conditionsen_US
dc.subjectOptimization of Friction Stir Welding Parameters to Enhance Weld Nugget Hardness in AA6061-B4C Composite Materialen_US
dc.subjectPreparation and Characterization of Hybrid Composite Polyethylene fibers: Novel Catalyst in Treatment of Medical Wasteen_US
dc.subjectSelf-Propelled Ultrasonic Rail Testing (SPURT) Car Using Ultrasonic Technique to Monitor Railway Track Defects: An Innovation Model for Indian Railwayen_US
dc.subjectSensitivity Analysis of Excavation Support Systems Using Numerical Modellingen_US
dc.subjectStatic Structural Analysis of Turbo-Impeller for Substitute Materialsen_US
dc.subjectStructural and Spectroscopic Investigation on Plasticized PEO/PMMA Blended Nanocomposite Solid Polymer Electrolytesen_US
dc.subjectStructural, Magnetic and Dielectric Investigation of Cr Doped Co-Zn Nanoferritesen_US
dc.subjectStudy on Mechanical Properties and Reduction Behavior of Agglomerated Fines Raw Materials for Pig Iron Productionen_US
dc.subjectSynthesis and Characterization of AI356-ZrOrSiC Hybrid Compositesen_US
dc.subjectSynthesis and Wire EDM Characteristics of Cu-AJ-Mn Ternary Shape Memory Alloys Using Taguchi Methoden_US
dc.subjectThrough Thickness Stress Analysis of GNPlEpoxy Nanocomposites with Low Graphene Contenten_US
dc.subjectTime-Dependent Stability Assessment of Coal Mine's Gallery Using New Geotechnical Classificationen_US
dc.subjectTowards Solving the Complexity Associated with Continuous Countercurrent Decantation (CCD) System in Solid-Liquid Separation Processesen_US
dc.subjectTribological Behavior, Mechanical Properties and Electrochemical Corrosion Response of Ultrasonically Assisted Ti02 Reinforced Electroless Ni-B Coatingsen_US
dc.subjectUtilization of Solid Plant Wastes as Composite Briquettes for Use in Blast Furnaceen_US
dc.subjectUtilization of Some of Major Steel Plant Wastes to Produce Metallic Ironen_US
dc.subjectWear Performance of Multi-Walled Carbon Nanotubes Grafted Hybrid Fiber (Carbon-Aramid) Friction Materialsen_US
dc.subjectSystematic Review on Implementation of Internet-of-Things-Based System in Underground Mines to Monitor Environmental Parametersen_US
dc.subjectFlammability Studies of Natural Fiber-Reinforced Polymer Composites fabricated by Additive Manufacturing Technology: A Reviewen_US
dc.subjectProcessing Techniques, Microstructural and Mechanical Properties of Additive Manufactured 316L Stainless Steel: Reviewen_US
dc.subjectStabilization of Mine Waste Dumps Through Bio-Engineeringen_US
dc.titleJOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES Den_US
dc.typeImageen_US
Appears in Collections:Alerting of New Journals (ME)

Files in This Item:
File Description SizeFormat 
JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA)-D-May-2024.pdf2.81 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.