Please use this identifier to cite or link to this item: http://localhost:80/xmlui/handle/123456789/8680
Title: JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES D
Keywords: JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES D
An Ancient Traditional Indian Archaeometallurgical Artefact: "Dokra"
Application of SiC and Graphite reinforced Aluminium Metal Matrix Composite in Braking Systems and its Validation Through Finite Element Analysis .
Page-465-Assessment of Environmental Impacts of Different Mine Unit Operations on Mine Workers and the Workplaces: A Field-Based Investigation
Assessment of Water Condition in Underground Mine Workings of Belgaon Coal Mine, India
Development of Aluminum-Based Composite Material by using Bagasse Ash and Eggshell as Reinforcement Along with Nano-CuO Particles
Development of Multiple Regression Model for Assessment of Coal Calorific Value in Indian Opencast Mines
Page-515-Development of Resistive-type loT -Based Methane Gas Concentration Transmitter Using Sn02 Material
Page-531-Diagnostics of Dissimilar Weld Joints of Austenitic to Pearlitic Steels by Acoustic Emission
Page-539-Effect of Mo- and SiC-Reinforced NiCr Microwave Cladding on Microstructure, Mechanical and Wear Properties
Effect of Oil Bean Stalk Filler on the Thermo-Mechanical Properties of Developed Aluminium Dross Composites for Building Ceilings
Effect of Processing Route on the Mechanical and Tribological Behaviour of AA8011 Hybrid Composites
Experimental Studies of Failure in L-Shaped Carbon Fiber-Reinforced Polymer Composite Under Pullout and Four-Point Bending
Evaluation of Absorption and Photoluminescence in Graphene Oxide Obtained Through a Simple Route
Fabrication and Characterization of Silicon Carbide and Graphite Reinforced Aluminium Matrix Composite
Fabrication of Al 6082/SiC Composite Using Friction Stir Processing
Finite Element Investigation of the Geometrical Parameters of Waviness Carbon Nanotube on Directional Young's and Shear Elastic Modulus of Polymer Nanocomposites
Friction and Wear Characteristics of Hot-Rolled A17075-TiOz-Graphite Hybrid Composites
Influence of SiC Reinforcement on AA6061 Alloy Composite Prepared by Gravity Die Casting
Influence of Silicon Carbide Particulates on Vibrational Characteristics for Al 7075 Composites
Investigation on Slurry Erosive Wear Behaviour of HVOF-Sprayed AizOrCe02 Coatings on AZ91
Maximum Aerobic Capacity and Relative Aerobic Strain among Mobile Mine Equipment Operators in Underground Mines
Microstructure and Tribo-corrosion Behavior of Stainless Steel-304 Cladding with the Mixture of Nickel and Chromium Carbide by Microwave Energy
Modelling of Shallow Drawing of Aluminium Alloy AA2014 Thin Sheet Using FE Simulations
On Titanium Powder Mixed Electric Discharge Machining of imonic C-263
Optimization of Process Parameters in the Synthesis of Ti02 Nanoparticle Catalyst to Produce Hydrocarbon Oil Using the Catalytic Pyrolysis Process
Optimization of Wear Parameters on Friction Stir Welded Dissimilar Aluminium Joints M. Madhusudan·
Piezo-beam Structure in a Pipe with Turbulent Flow as Energy Harvester: Mathematical Modeling and Simulation
Progressive Damage Analysis of Random Oriented Chopped Glass Fiber-Reinforced Laminate Under Three-Point Bending Test
Qualitative Damage Assessment of Laser Contact Opening and Microstructural Evolution at the Rear Contact of a Perc Mono Crystalline Si Solar Cell upon Co-Firing with Si Doped Al Paste
Stochastic Study of Random-Ballistic Competitive Growth Model in 2 + 1 Dimension and Related Scaling Exponents
Study on Effect of Gouge Depth on the Microstructure and Tensile Properties of 18% i Maraging Steel Welds Made Through Hot Wire GTA Welding C. Magadum . R.K. Gupta- P. Senthil .M. Manohar . S. Biju
Synthesis and Characteristics of Heat Treated Al6061-Zirconium Dioxide Metal Matrix Composites
Synthesis of Alumina Sol Binder for Pure Alumina Refractory Castable and its Comparison with Other Commercially Available Binders
Taguchi Analysis of the Deformation Characteristics of Single-Point Cutting Tool with Micro-Tool Coatings During Orthogonal Machining
CASESTUDY Critical Analysis of Powder Factor in Dragline Bench Blasting: A Case Study
Page-831-REVIEWPAPERS A Review on High-Velocity Oxy-Fuel (HVOF) Coating Technique K. Anusha· B.C. Routara- S. Guha
Applications and Challenges of 3D Printed Polymer Composites in the Emerging Domain of Automotive and Aerospace: A Converged Review
ARTICLEOF PROFESSIONALINTERESTS Exploiting Machine Learning in Multiscale Modelling of Materials
Modeling and Simulation of Brake Disc Using Lightweight Materials
Simulation of Temperature Distribution in a Brake Pad Ceramic Composite Material
Issue Date: Dec-2023
Publisher: Springer
Series/Report no.: Volume-104;Issue-2
URI: http://localhost:80/xmlui/handle/123456789/8680
ISSN: 2250-2122
Appears in Collections:Alerting of New Journals (ME)

Files in This Item:
File Description SizeFormat 
JOURNAL OF THE INSTITUTION OF ENGINEERS(INDIA)-Series-D-July-2023.pdf2.22 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.