Please use this identifier to cite or link to this item:
http://localhost:80/xmlui/handle/123456789/8010| Title: | JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES D |
| Keywords: | JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA): SERIES D S A Mathematical and Experimental Approach to Improve Strength and Corrosion Resistance of Gas Tungsten Arc, Electron Beam and Friction Stir Welded AA2219-T87 AI A Study on the Mechanical Properties of Rare Earth-based Aluminium Composite A Study on the Evolution of Structural and Optical Properties in the Thermally Evaporated Ag2Te Thin Films An Experimental Study on Bulge Test of Commercially Pure Aluminium Sheet Metal Analysis of Dielectric Relaxation in Sodium Silicate (Na2Si03) using Complex Impedance Spectroscopy Analysis of Stress Through the Thickness of Hybrid Laminated Nanocomposites using Finite Element Method Analysis of Various Machine Learning Algorithms for Cast Aluminium Alloy to Estimate Fatigue Strength pplication of the Standardized Injury Rate (SIR) Concept to Determine the AccidentlInjury Proneness of Underground Hard Rock Mine Workers Assessment of Work Postures and Physical Workload of Machine Operators in Underground Coal Mines Page-99-Alloy for Tractor Application c.c. Shetteppanavar· Design of Dump Slope on Weak Foundation Development and Implementation of Innovative Approaches to Fixing Wells in Difficult Conditions A.O Effect of Blaine Number on the Physical and Mechanical Properties of Iron Ore Pellets Effect of Nano-Filler Aluminum Oxide and Graphene on Flammability Properties of Kenaf Epoxy Composites Effect of Silicon Addition on Erosion-Corrosion Characteristics of High-Tensile Brasses Enhanced Biosorption of Pb(II) by Pterocladia Pinnata from Synthetic Solution Enhanced Mechanical Properties of Metal filled 3D Printed Polymer Composites Estimation of Filling Property of Cast AI-Si-Mg Alloy Evolution of Nusselt Correlation for Recovery of Waste Heat from Industry Flue Gases using Quarry Dust and Iron Ore Particles Evolution of Residual Stresses in Friction Stir Welded Joints of AA 7039 G. Chauhan Experimental and Numerical Analysis of Pressure Gradient and Flow Characteristics of Cemented Paste Backfill Based on Carbonate Experimental Studies on the Mechanical Behaviour of Three-Dimensional PLA Printed Parts by Fused Filament Fabrication Exploring Possibilities for Fabricating Cu- TiB2 Composite Through Different Powder Metallurgy Routes Exploration of Various Forging Route Performance of Cast A356 Alloy Reinforced with Fly Ash and MWCNT Hybrid Composites Friction and Wear Characteristics of Coconut Shell Ash and Titanium Dioxide-Reinforced A16061-Based Hybrid Composites Introduction of Safe Noise Zone (SNZ) Concept to Minimize the Adverse Effects of Noise during Jumbo Drilling Operation in Indian Underground Metalliferous Mines Low-Velocity Impact Damage Due to Debris Particles Impacted on Titanium Alloy (Ti-6AI-4V) Gas Turbine Blades Numerical Analysis of Joule Heating in a Ni- Ti Segmented Wire used in Sensing Applications Numerical Simulation of Bimorph Piezoelectric Beam with Circular Holes Numerical Simulation of Excavation in Opencast Mine and its Effect on Ground Vibration Optimization of Wear Properties of B4C Nanoparticle- Reinforced AI7075 Nanocomposites Using Taguchi Approach Removal of Cadmium Metal using a Novel Material Corncob: Characteristics and Kinetics Study Temperature-Dependent Wear Behavior of Air Plasma Sprayed Alumina and Alumina-Titania Composite Coatings Ventilation Air Requirement for Mass-Production Panels (MPPs) in Indian Coal Mines: A Critical Appraisal Workability Studies on AI6061 Alloy and-A16061 Metal Matrix Composites Reinforced with Silicon Carbide Particles Under Cold Backward Extrusion CASE STUDY Critical Analysis of Tandem Dragline Performance in Open Cast Coal Miness REVIEWPAPERS Fabrication and Applications of 2D Few-Layer Antimonene: An Overview Nanomaterials Synthesis via Laser Ablation in Liquid: Trifluorosulfonyl Imide-Based Ionic Liquid Electrolytes for Lithium-Ion Battery BRIEF COMMUNICATION Evaluation of Damage Area on Low-Velocity Impact Tested AA3003 Sandwich Panels Using Digital Image Analysis: A Novel Method |
| Issue Date: | Jan-2023 |
| Publisher: | Springer |
| Series/Report no.: | Volume-104;ISSUE-01 |
| URI: | http://172.16.0.4:8085/heritage/handle/123456789/8010 |
| ISSN: | 2250-2122 |
| Appears in Collections: | Alerting of New Journals (ME) |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| JOURNAL OF THE INSTITUTION OF ENGINEERS (INDIA)-SERIES-D.pdf | 2.18 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.